Rail King 4-6-4 Hudson Steam Locomotive Operator's Manual download pdf (Page 15)

RailKing 4-6-4 Steam Engine 15

The locomotive’s lights are controlled by a constant voltage circuit in the engine. They

are easy to remove and replace when they burn out. See the diagrams and directions

below for instructions on accessing and replacing the light bulbs in this locomotive.

You can obtain replacement bulbs directly from the M.T.H. Parts Department (phone:

410-381-2580; e-mail: [email protected]; mail: 7020 Columbia Gateway Drive,

Columbia MD 21046-1532)

1. To replace the headlight in this model you will need to follow the disassembly

instructions for greasing the engine in figure 5a on pg. 11. Once the boiler has been

removed you can access the headlight and firebox lights (see figure 8and 9).

2. Remove the bulbs by gently unscrewing them.

3. Reassemble in reverse order, being careful not to pinch any wires.

Headlight Bulb

Figure 8: Headlight Location

Light Bulb Replacement Instructions

Firebox Light

Figure 9: Firebox Light

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

Rail King 4-6-4 Hudson Steam Locomotive Operator's Manual Page 15