Rail King 2-8-0 Steam Freight/ Passenger Set Operator's Manual download pdf (Page 6)

RailKing 2-8-0 Steam Freight/Passenger Set with Loco-Sound™

! Plug tender plug into boiler socket at the back of cab.

! Connect the draw bar between the engine and tender.

DO NOT CONNECT

This Engine To A

Tender From

Another Engine; It May

Cause Serious Damage.

Look at the bottom of the

engine and tender where

each will have a color-coded

stamp. If they match you

may connect those two

pieces; if not, don't.

CABLE CURVES

UPWARD

Position

armature

for proper

operation

Incorrect

Position

Place the engine and cars

on the track.

Open couplers by

pressing down on plunger.

Push cars together to

couple.

STEP

Smoke Unit

ON/OFF Switch

Add 15-20 Drops

Smoke Fluid

Priming the Smoke Unit

You should prime the smoke unit with smoke fluid

before operating. Add 15-20 drops of smoke fluid from

the included pipette through the smokestack, then gently

blow into the stack to eliminate any air bubbles in the

fluid.

If you choose not to prime the unit with fluid, turn the

smoke unit switch located under the tender to the OFF

position. Running the engine without a primed smoke

unit may cause damage. See the "ProtoSmoke Unit

Operation" section of this book for more information on

smoke unit maintenance.

Running the engine without a primed

smoke unit may cause damage

Connecting the Engine

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Rail King 2-8-0 Steam Freight/ Passenger Set Operator's Manual Page 6

Comments to this Manuals

Related products and manuals for Engine Rail King 2-8-0 Steam Freight/ Passenger Set