Rail King SW-8 Operations Instructions download pdf (Page 25)

RailKing SW 8-9 Operating Manual

fully seated inside the groove. Any portion of the tire extending out of the

groove can cause the engine to wobble. A razor blade can be used to trim

away any excess tire that doesn’t seat itself inside the groove properly.

Once the new tire(s) are in place, reassemble the truck sides to the truck

blocks and then reassemble the chassis to the body. Replacement tires are

available directly from MTH Electric Trains.

HEADLIGHT REPLACEMENT

The SW 8-9 locomotive contains two bulbs that are controlled by the track

voltage. The headlight bulb simply plugs into its lamp socket and can be

easily removed should the bulbs expire. To remove the bulbs, follow the

cab removal instructions found in the lubrication section on the preceding

pages. Once the cab has been removed from the chassis, gently twist and

push the bulb to unlock it from its lamp housing. Once unlocked, the bulb

will pull out of the socket. To replace the rear bulb, remove the socket from

the plug at the rear of the engine. Replacement bulbs are available directly

from MTH Electric Trains.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Rail King SW-8 Operations Instructions Page 25