Rail King 6-8-6 Steam Turbine Engine Operations Instructions download pdf (Page 17)

RailKing 6-8-6 Bantam Turbine Steam Engine

FYS/PSA Remedy

Once in FYS/PSA, the engine

doesn’t go into reverse.

When the FYS/PSA enters its last

sequence the bell automatically

comes on.

When FYS/PSA is enabled,

pressing the whistle and bell

buttons has no effect.

I push the direction button but the

next sound clip in the sequence

does not play or the engine does

not come out of FYS/PSA after

fourth press of the direction

button.

So that FYS/PSA effects can be

as realistic as possible,

Proto-

Sound 2.0 disables the reversing

unit whenever FYS/PSA is

enabled. This way the engine

remains still at its stop as the

operator cycles through the

FYS/PSAsequences.

FYS/PSA is programmed to start

ringing the bell at that point. After

approximately 12 seconds it will

automatically turn off.

Because FYS/PSA must control

various effects in each sequence,

Proto-Sound 2.0 takes control of

these sound effects until you exit

Each FYS/PSA clip must play for

approx. 30 seconds before

FYS/PSA will advance to the next

step in the FYS/PSA cycle. Wait

at least 30 seconds in each

FYS/PSA sound clip before

pressing the direction button.

Compatibility

This engine will operate on any traditional O-31 or larger O Gauge track

system, including M.T.H.’s RealTrax

or ScaleTrax

™

or traditional tubular

track. It is also compatible with most standard AC transformers. (See page 18

for a complete list of compatible transformers and wiring instructions.)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Rail King 6-8-6 Steam Turbine Engine Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Toys & accessories Rail King 6-8-6 Steam Turbine Engine